INO-272
HORIZONTAL VERTICAL INDEXING FIXTURE
PF100B/5C
INDEXING FIXTURE
K100
TAIL-STOCK
Radial run— out of spindle |
0.005 |
Radial run— out of entre hole of
spindle (measured from spindle nose 25mm) |
0.015 |
End surface run out of the spindle's support
shoulder |
0.005 |
Parallelism of centre line of spindle to base surface (horizontal application) |
0.02 |
Squareness of centre line of spindle to base surface (vertical application) |
0.02 |
Accuracy |
± 3' |
Applied at works in grinding, milling, drilling.
Provides division on 2; 3; 4; 6; 8; 12 and 24 parts
Collet fit for spindle – 5C (INO-010) |
