| 
|
::. INDEXING FIXTURES |
INO-270
INDEXING FIXTURE
PF70/5C
INDEXING FIXTURE
K070
TAIL-STOCK
Radial run-out of spindle outer taper |
0,01 |
Radii run— out of center hole (measured
from spindle nose 25mm) |
0,03 |
Parallelism of centre line of spindle to
base surface |
0.02 |
Accuracy |
±4' |
Applied at works in grinding, milling, drilling.
Provides division on 2; 3; 4; 6; 9; 12; 18 and 36 parts (36 hole in 10°).
Index step with the vernier - 1°.
Collet fit for spindle – 5C (INO-010)
|
|
|
