V-TYPE MACHINE VISES FQV
•Two moving fingers press the cylinder workpiece to
the prism and adjust it to the center.
•The prism is double sided with the possibility to reinstall
it.
•The vises can be installed on the side surface of the
base.
•Parallelism and perpendicularity of working surfaces
– 0,01…0,03 mm.
•In case of changes of laps the mechanical processing is necessary for their working
surfaces in assembly with vices to get the accuracy
parameters announced in the technical documentation.
•Applied at works in grinding, milling, drilling, horizontal
shaping and other machines.
Model |
Jaw width
mm
|
Minimum clamp
diameter.
mm
|
Maximum clamp
diameter.
mm
|
Width of
locating key
mm |
Clamping
force
kg |
Weight
kg |
FQ100/10-80V |
100 |
10 |
80 |
14 |
2000
|
21 |
CERTIFICATE OF QUALITY
1. Accuracy of contact of mobile jaw with
the reference cylinder surface, installed on the vises prism
-- 0,01 mm
2. Parallelism of the axis of reference cylinder fixed in
teh vises to the base support surface - 0,03/100 mm
3. Parallelism of intersection line for working surfaces
in relation to the base support surface - 0,03/100 mm
4. Perpendicularity of base support surfaces to ach other
- 0,05 mm
PACKING LIST
Vise – 1 pcs.
Spanner – 1 pcs.
Sitting stops – 1 pcs.
T-slots bolt – 2 pcs.
Nut – 2 pcs.
Washer – 2 pcs.
Key nuts – 2 pcs
Cylindrical head screw - 2 pcs
|
